Replacement Headlight Bulbs - How Long Should These Car Bulbs Last?

If one of your headlight bulbs has blown you are normally the last to know about it, driving around blissfully unaware that there is light only coming out of one headlight, whilst other drivers can clearly see that one of you car bulbs has blown. Once you know that a bulb has blown you then have to find the right replacement and install it. But how do you know that you are getting the best from your bulbs and is there a way to have them last longer?

Factory Reconditioned Tools

In effect there are really just three types of car bulbs that you can install in your headlights and they are, standard halogen bulbs, modern upgrade xenon bulbs and heavy duty long life bulbs. When determining how long a headlight bulb should last its is well worth remembering the old adage that "The light that burns twice as bright, lasts half as long".

Factory Reconditioned Tools

Standard halogen bulbs, are the type of bulb which was fitted by the vehicle manufacturer at the factory and are normally full OEM (Original Equipment Manufacturer) specification. These type of car bulbs will typically last between 350-400 hours of use and emit a reasonable level of light onto the road.

Upgrade xenon bulbs, like the Osram Night Breaker or Philips Extreme Power bulbs use xenon gas to produce a light up to 90% brighter than standard halogen bulbs, making night-time driving safer and less stressful, and because of their high performance construction they can be expected to last between 200-300 hours.

Finally there are long life headlight auto bulbs and, as their name suggests, they will certainly cut the amount of time you will need to spend replacing your car bulbs. By using reinforced heavy duty components you can expect a long life bulb to last over 50% longer than ordinary halogen bulbs, giving you an expected bulb life of 500-600 hours, whilst still producing the same light output as ordinary halogen bulbs. Long life car bulbs are slightly more expensive than their standard halogen counterparts, but are considerably more economical when you factor in their extra long life span.

When replacing the bulbs in your headlights it is recommended, and good sense, to change them both at the same time. Firstly if one bulb has blown the odds are very strong that the other one will blow shortly afterward, and by changing them together you wont have to repeat job for a while, and secondly if your bulb has comes to the end of its life span it will be past its optimum light performance output.

One final point to note when changing your headlight car bulbs is to not touch the glass with bare skin during the process. No matter how clean your hands are, bare skin will always leave a residual grease mark on the glass, this creates a hot spot on the and will eventually lead to a bulbs premature failure. So, to get the best from your headlights always change your bulbs in pairs, wear protective gloves during the process and pick the right type to suit your requirements.

Replacement Headlight Bulbs - How Long Should These Car Bulbs Last?
Factory Reconditioned Tools

Special Price!!! Factory-Reconditioned Milwaukee 2602-82 M18 Compact Hammer Drill/Driver Kit, 1/2-Inch

Nov 07, 2011 19:37:53

Factory-Reconditioned Milwaukee 2602-82 M18 Compact Hammer Drill/Driver Kit, 1/2-Inch
Click for larger image and other views

Factory-Reconditioned Milwaukee 2602-82 M18 Compact Hammer Drill/Driver Kit, 1/2-Inch

>> Click here to update Cheapest prices for Factory-Reconditioned Milwaukee 2602-82 M18 Compact Hammer Drill/Driver Kit, 1/2-Inch <<

Factory-Reconditioned Milwaukee 2602-82 M18 Compact Hammer Drill/Driver Kit, 1/2-Inch Feature

  • Milwaukee 4-pole frameless motor delivers 550 inches-to-pounds of peak torque and 29,000 BPM
  • Variable speed trigger produces 0 to 450 RPM (low speed) and 0 to 1,700 RPM (high speed)
  • Compact and ergonomic design at 8-1/2-Inches in length
  • Digital Power Management (DPM) overload protection prevents damage to the tool and battery in abusive situations
  • This factory-reconditioned model is the same as the new model 2602-22


Factory-Reconditioned Milwaukee 2602-82 M18 Compact Hammer Drill/Driver Kit, 1/2-Inch Overview

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes 18V Cordless M18 1/2-in Hammer Drill/Driver Kit - 2602-82, (2) M18 XC High Capacity Lithium-Ion Batteries, 1-Hour Charger, Kit Box



SAVE NOW on the special offers below!

Available In Stock.

This Factory-Reconditioned Milwaukee 2602-82 M18 Compact Hammer Drill/Driver Kit, 1/2-Inch ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Factory-Reconditioned Milwaukee 2602-82 M18 Compact Hammer Drill/Driver Kit, 1/2-Inch

Limited Offer Today!! Factory-Reconditioned Milwaukee 2602-82 M18 Compact Hammer Drill/Driver Kit, 1/2-Inch Black Friday and Cyber Monday Deals

Slide Projectors 35Mm Wilton Candy Melts